Ethernet Port Commands
page 20-46 OmniSwitch 6250 CLI Reference Guide November 2009
1/21 - 0 DIS MDI -
1/21 - 0 DIS Auto -
1/22 - 0 DIS MDI -
1/22 - 0 DIS Auto -
1/23 - 0 DIS MDI -
1/23 - 0 DIS Auto -
1/24 - 0 Tx MDI -
1/24 Active 65535 Tx-N-Rx Auto C
-> show interfaces 1/24 pause
Slot/Port Active Wait time(usec) Cfg-Pause Cfg-Cross Hybrid Type
-----------+--------+---------------+--------+-----------+-----------
1/24 - 0 Tx MDI -
1/24 Active 65535 Tx-N-Rx Auto C
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
esmConfTable
esmPortSlot
esmPortIF
esmPortPauseSlotTime
esmPortCfgCrossover
esmPortActiveHybridType
dot3PauseTable
dot3PauseSlotTime
output definitions
Slot/Port Interface slot and port number
Active Interface status.
Wait time The amount of time, in microseconds, the neighbor interface will wait
after receiving a PAUSE frame from the local interface.
Cfg-Pause The flow control setting (Tx = transmit, Rx = receive, Tx-N-Rx =
transmit and receive). Configured through the interfaces pause com-
mand.
Cfg-Cross The user-configured cross-over setting (Auto, MDI, or MDIX). Con-
figured through the interfaces crossover command.
Hybrid Type The configured active media type for a hybrid port (F = fiber, C = cop-
per, NA = not applicable).
show interfaces hybrid pause Displays flow control pause settings for combo ports.
To Next Page
Loading...
