Ethernet Port Commands
page 20-48 OmniSwitch 6250 CLI Reference Guide November 2009
Examples
-> show interfaces 1/2 accounting
1/2 ,
Rx undersize packets = 0,
Tx undersize packets = 0,
Rx oversize packets = 0,
Tx oversize packets = 0,
Rx packets 64 Octets = 3073753,
Rx packets 65To127 Octets = 678698,
Rx packets 128To255 Octets = 21616,
Rx packets 256To511 Octets = 21062,
Rx packets 512To1023 Octets = 2,
Rx packets 1024To1518 Octets = 84,
Rx packets 1519to4095 Octets = 0,
Rx packets 4096ToMax Octets = 0,
Rx Jabber frames = 0
Release History
Release 6.6.1; command was introduced.
Related Commands
output definitions
Rx undersize packets Number of undersized packets received.
Tx undersize packets Number of undersized packets transmitted.
Rx oversize packets Number of oversized packets received.
Tx oversize packets Number of oversized packets transmitted.
Rx packets Octets Number of packets received in each listed octet range.
Rx Jabber frames Number of jabber packets received (longer than 1518 octets).
Tx deferred frames Number of packets for which transmission was delayed (Ethernet
only).
show interfaces Displays general interface information (e.g., hardware, MAC
address, and input/output errors).
show interfaces counters Displays interface counter information (e.g., unicast packets
received/transmitted).
To Next Page
Loading...
