Ethernet Port Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 20-69
Release History
Release 6.6.1; command was introduced.
Related Commands
Rx Lost Frames Number of Lost Frames received.
Rx Error Frames Number of error frames received.
Rx CRC Error Frames Number of CRC error frames received.
Rx Alignments Err Number of Alignments Error frames received.
Bytes Xmitted Number of Bytes transmitted.
Tx Unicast Frames Number of unicast frames transmitted.
Tx Broadcast Frames Number of broadcast frames transmitted.
Tx M-cast Frames Number of multicast frames r transmitted.
Tx Undersize Frames Number of undersized frames transmitted.
Tx Oversize Frames Number of oversized frames transmitted.
Tx Lost Frames Number of Lost Frames transmitted.
Tx Collided Frames Number of collision frames received or transmitted.
Tx Error Frames Number of error frames transmitted.
show interfaces hybrid
accounting
Displays interface accounting information (e.g., packets received/
transmitted) for combo ports.
show interfaces hybrid counters Displays interface counter information (e.g., unicast packets
received/transmitted) for combo ports.
show interfaces hybrid counters
errors
Displays interface error frame information (e.g., CRC errors, transit
errors, receive errors) for combo ports.
show interfaces hybrid
collisions
Displays interface collision information (e.g., number of collisions,
number of retries) for combo ports.
show interfaces hybrid status Displays the interface line settings (e.g., speed, mode) for combo
ports.
show interfaces hybrid traffic Displays interface traffic statistics (input/output bytes and packets)
for combo ports.
output definitions (continued)
To Next Page
Loading...
