Alcatel-Lucent OmniSwitch 6250 - Page 744

Ethernet Port Commands
page 20-72 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
ifTable
ifLinkUpDownTrapEnable
esmConfTable
esmPortSlot
esmPortIF
esmPortAutoSpeed
esmPortAutoDuplexMode
esmHybridConfTable
esmPortCfgHybridMode
esmPortCfgHybridType
esmHybridPortCfgSpeed
esmHybridPortCfgDuplexMode
Detected Duplex Detected line duplex (Half duplex/Full duplex/Auto).
Detected Hybrid Type The detected combo port type, which can be F (fiber) or C (copper).
Configured Speed Configured line speed (10/100/Auto/1000/10000 Mbps).
Configured Duplex Configured line duplex (Half duplex/Full duplex/Auto).
Configured Hybrid Mode The configured combo port type, which is PF (Preferred Fiber). Con-
figuring the Hybrid Mode is not supported.
Trap Link Up/Down Trap Link status (up/down).
trap port link Enables/disables Trap LinkUpDown.
interfaces hybrid speed Configures interface line speed on combo ports.
interfaces hybrid duplex Configures duplex mode on combo ports.
interfaces clear-violation-all Configures one or more combo ports to use the fiber SFP port(s)
instead of the equivalent copper RJ-45 port(s) when both ports are
enabled and have a valid link.
output definitions (continued)