Ethernet Port Commands
page 20-80 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
output definitions
Rx undersize packets Number of undersized packets received.
Tx undersize packets Number of undersized packets transmitted.
Rx oversize packets Number of oversized packets received.
Tx oversize packets Number of oversized packets transmitted.
Rx packets Octets Number of packets received in each listed octet range.
Rx Jabber frames Number of jabber packets received (longer than 1518 octets).
Tx deferred frames Number of packets for which transmission was delayed (Ethernet
only).
show interfaces hybrid Displays general interface information (e.g., hardware, MAC
address, input/output errors) for combo ports.
show interfaces hybrid counters Displays interface counter information (e.g., unicast packets
received/transmitted) for combo ports.
To Next Page
Loading...
