VLAN Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 22-17
Release History
Release 6.6.1; command was introduced..
Related Commands
MIB Objects
vlanMgrVpa
vpaTable
vpaVlanNumber
vpaIfIndex
vpaType
vpaState
vpaStatus
vlanMgrVlan
vlanTable
vlanAdmStatus
vlanOperStatus
port admin Port administrative status: on (enabled) allows the port to send and
receive data when it is active; off (disabled) prevents the port from
sending and receiving traffic even if it has an active connection.
port oper Port operational status: on (enabled) or off (disabled). If a port is cur-
rently in use, then the operational status is enabled. A port must have an
enabled administrative status before it can become operationally
enabled.
show vlan Displays list of VLANs configured on the switch.
show vlan router mac status Displays the current MAC router operating mode (single or multiple)
and VLAN router interface statistics.
show vlan gvrp Displays a list of VLANs learned through GVRP and their details.
show vlan ipmvlan Displays IPMVLAN information for a specific IPMVLAN, a range of
IPMVLANs, or all the IPMVLANs.
show ip interface Displays IP router information.
output definitions
To Next Page
Loading...
