GVRP Commands
page 23-2 OmniSwitch 6250 CLI Reference Guide November 2009
gvrp
Enables GVRP on the switch globally.
gvrp
no gvrp
Syntax Definitions
N/A
Defaults
By default, GVRP is disabled on the switch.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Use the no form of this command to disable GVRP globally on the switch.
• Disabling GVRP globally will delete all the learned VLANs.
• GVRP is supported only when the switch is operating in the flat Spanning Tree mode; it is not
supported in the 1x1 mode.
Examples
-> gvrp
-> no gvrp
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
dot1qGvrpStatus
show gvrp configuration Displays the global configuration for GVRP.
To Next Page
Loading...
