GVRP Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 23-23
show gvrp last-pdu-origin
Displays the source MAC address of the last GVRP message received on a specific port or an aggregate of
ports.
show gvrp last-pdu-origin {linkagg agg_num | port slot/port}
Syntax Definitions
agg_num The number corresponding to the aggregate group.
slot/port The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show gvrp last-pdu-origin port 1/21
Last-PDU Origin : 00:d0:95:ee:f4:64
Release History
Release 6.6.1; command was introduced.
Related Commands
N/A
MIB Objects
Dot1qPortvlantable
dot1qPortGvrpLastPduOrigin
output definitions
Last-PDU Origin The source MAC address of the last PDU message received on the spe-
cific port.
To Next Page
Loading...
