Alcatel-Lucent OmniSwitch 6250 - Show Ethernet-Service Mode

VLAN Stacking Commands
OmniSwitch CLI Reference Guide November 2009 page 24-29
show ethernet-service mode
Displays the active VLAN Stacking mode for the switch.
show ethernet-service mode
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
This command is available in both modes: Legacy or EServices.
Examples
-> show ethernet-service mode
Vlan Stacking Mode: Legacy Mode
-> show ethernet-service mode
Vlan Stacking Mode: EServices Mode
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaEServiceInfo
alaEServiceMode
output definitions
Vlan Stacking Mode Displays the current VLAN Stacking mode (Legacy Mode or ESer-
vices Mode).
show ethernet-service Displays configuration information for VLAN Stacking Ethernet ser-
vices.