VLAN Stacking Commands
OmniSwitch CLI Reference Guide November 2009 page 24-33
Service Name : ipmv_service
IPMVLAN : 40
NNI(s) : No NNIs configured
SAP Id : 2
UNIs : 1/22
CVLAN(s) : 100
sap-profile : translate_profile
-> show ethernet-service service-name CustomerABC
Service Name : CustomerABC
SVLAN : 255
NNI(s) : 1/22
SAP Id : 10
UNIs : 2/10, 2/11
CVLAN(s) : 500, 600
sap-profile : default-sap-profile
-> show ethernet-service svlan 300
Service Name : VideoOne
SVLAN : 300
NNI(s) : 2/1, 3/2
SAP Id : 20
UNIs : 1/1, 1/2
CVLAN(s) : 10, 20
sap-profile : sap-video1
SAP Id : 30
UNIs : 1/3
CVLAN(s) : 30, 40
sap-profile : sap-video2
Release History
Release 6.6.1; command was introduced.
output definitions
Service Name The name of the VLAN Stacking service.
SVLAN or IPMVLAN Displays the SVLAN ID associated with the service. Note that SVLAN
appears as the field name if the VLAN ID is an SVLAN; IPMVLAN
appears as the field name if the VLAN ID is an IP Multicast SVLAN.
NNI(s) VLAN Stacking Network Network Interface ports associated with the
service to tunnel SVLAN customer traffic.
SAP Id The ID number for the VLAN Stacking Service Access Point that is
applied to the service.
UNIs VLAN Stacking User Network Interface ports that receive customer
traffic.
CVLAN(s) Customer VLAN IDs ingressing on UNI ports.
sap-profile The name of the SAP profile associated with the SAP.
To Next Page
Loading...
