Ethernet OAM Commands
page 25-46 OmniSwitch 6250 CLI Reference Guide November 2009
show ethoam remote endpoint domain
Displays the information of all remote MEPs learned as a part of the CCM message exchange.
show ethoam remote endpoint domain {domain_name | mac_address} association association_name
end-point endpoint_id [remote-mep remote_mepid]
Syntax Definitions
domain_name Specifies the domain name.
mac_address Specifies the CFM system MAC address.
association_name Specifies the name of the Ethernet OAM Association.
endpoint_id Specifies the MEP of a specific MA. The valid range is 1–8191.
remote_mepid The remote MEP. The valid range is 1–8191.
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
N/A
Examples
-> show ethoam remote-endpoint domain esd.alcatel-lucent.com association alcatel-
sales endpoint 3
Legends: PortStatusTlv: 1 = psBlocked, 2 = psUp, 3 = psNoTlv
InterfaceStatusTlv: 1 = ifUp, 2 = ifDown, 3 = ifUnknown
MEP-ID RMEP OkFailed Mac Address Port Status I/f Status
Status Time Tlv Tlv
------+--------------+-------------+------------------+-------------+----------
4 RMEP_OK 500 00:D0:95:EE:F6:56 1 2
Total number of remote MEPs = 1
output definitions
MEP-ID Indicates the Maintenance End Point.
RMEP Status The operational state of the remote MEP Remote State
machines for this MEP, which can be RMEP_IDLE, RMEP_START,
RMEP_FAILED, or RMEP_OK.
To Next Page
Loading...
