Chassis Management and Monitoring Commands
page 2-44 OmniSwitch 6250 CLI Reference Guide November 2009
Admin Status: POWER ON,
Operational Status: UP,
Power Consumption: 200,
Power Control Checksum: 0x0,
MAC Address: 00:d0:95:a3:e5:0b,
ASIC - Physical 1 (hex): BCM5695_A1,
ASIC - Physical 2 (hex): BCM5695_A1,
ASIC - Physical 3 (hex): BCM5670_A1
CPLD - Physical 1 (hex): 0006/00
Release History
Release 6.6.1; command was introduced.
Related Commands
output definitions
Model Name The NI’s module name. For example, OS9-GNI-C24 indicates a twenty
four-port 10/100/1000BaseT Ethernet module.
Description A general description of the NI. For example, 24pt 10/100/1000BaseT
Mod indicates a twenty four-port 10/100/1000BaseT Ethernet module.
Part Number The Alcatel-Lucent part number for the NI.
Hardware Revision The hardware revision level for the NI.
Serial Number The Alcatel-Lucent serial number for the NI’s printed circuit board
(PCB).
Manufacture Date The date the NI was manufactured.
Firmware Version The firmware version for NI’s ASICs.
Admin Status The current power status of the NI. Options include POWER ON or
POWER OFF.
Operational Status The operational status of the NI. Options include UP or DOWN. The
operational status can be DOWN while the power status is on, indicat-
ing a possible software issue.
Power Control Checksum The current power control checksum for the corresponding NI.
MAC Address The MAC address assigned to the NI.
ASIC - Physical General information regarding the NI’s ASICs.
CPLD - Physical General information regarding the CPLD.
show module Displays the basic information for either a specified module or all mod-
ules installed in the chassis.
show module status Displays the basic status information for either a specified module or all
modules installed in the chassis.
To Next Page
Loading...
