Ethernet OAM Commands
page 25-50 OmniSwitch 6250 CLI Reference Guide November 2009
show ethoam linktrace-reply domain
Displays the content of the Linktrace reply (LTR) returned by a previously transmitted LTM. This
command displays the LTR based on the transaction identifier or sequence number of the LTM for which
the LTR is to be displayed.
show ethoam linktrace-reply domain {domain_name | mac_address} association association_name
endpoint mep_id tran-id transaction_id
Syntax Definitions
domain_name Specifies the domain name.
mac_address Specifies the CFM system MAC address.
association_name Name of the Ethernet OAM Association.
mep_id Specifies the MEP for which LTR is to be displayed. The valid range is
1-8191.
transaction_id Specifies the Transaction ID or sequence number returned from a
previously transmitted LTM.
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
N/A
Examples
-> show ethoam linktrace-reply domain esd.alcatel-lucent.com association alcatel-
sales endpoint 3 tran-id 13358
Ttl : 63,
LTM Forwarded : no,
Terminal MEP : yes,
Last Egress Identifier : 00:00:00:D0:95:EC:84:B0,
Next Egress Identifier : 00:00:00:D0:95:EE:F6:56,
Relay Action : RLY_HIT,
Ingress Action : ING_OK,
Ingress Mac : 00:D0:95:EE:F6:6C,
Egress Action : EGR_NONE,
Egress Mac : 00:00:00:00:00:00
To Next Page
Loading...
