Ethernet OAM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 25-51
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
Dot1agCfmLtr
dot1agCfmLtrTtl
dot1agCfmLtrForwarded
dot1agCfmLtrTerminalMep
dot1agCfmLtrLastEgressIdentifier
dot1agCfmLtrNextEgressIdentifier
dot1agCfmLtrRelay
dot1agCfmLtrIngress
dot1agCfmLtrIngressMac
dot1agCfmLtrEgress
dot1agCfmLtrEgressMac
output definitions
Ttl Time to live field for the returned LTR.
LTM Forwarded Indicates whether the LTM was forwarded or not.
Terminal MEP Indicates whether the MP reported in the reply Ingress/Egress TLV is a
MEP.
Last Egress Identifier Identifies the MEP linktrace initiator that originated, or the responder
that forwarded, the LTM to which this LTR is the response.
Next Egress Identifier Identifies the linktrace responder that transmitted this LTR, and can for-
ward the LTM to the next hop.
Relay Action Indicates how the dataframe targeted by the LTM would be passed to
Egress bridge port. Options include RLY_HIT, RLY_FDB, or
RLY_MPDB.
Ingress Action Indicates how the dataframe targeted by the LTM would be received on
the receiving MP. Options include ING_NONE, ING_OK,
ING_DOWN, ING_BLOCKED, or ING_VID.
Ingress Mac The MAC address returned in the ingress MAC address field.
Egress Action Indicates how the dataframe targeted by the LTM would be passed
through Egress bridge port. Options include ING_NONE, ING_OK,
ING_DOWN, ING_BLOCKED, or ING_VID.
Egress Mac The MAC address returned in the egress MAC address field.
ethoam linktrace Enables the maintenance entity to initiate transmitting of Link Trace
Messages (LTM).
To Next Page
Loading...
