Alcatel-Lucent OmniSwitch 6250 - Show Ethoam Linktrace-Tran-ID

Ethernet OAM Commands
page 25-52 OmniSwitch 6250 CLI Reference Guide November 2009
show ethoam linktrace-tran-id
Displays the transaction identifiers returned by previously generated LTMs from a specified MEP.
show ethoam linktrace-tran-id domain {domain_name | mac_address} association association_name
endpoint mep_id
Syntax Definitions
domain_name Specifies the domain name.
mac_address Specifies the CFM system MAC address.
association_name Name of the Ethernet OAM Association.
mep_id Specifies the MEP for which LTR is to be displayed. The valid range is
1-8191.
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
N/A
Examples
-> show ethoam linktrace-tran-id domain esd.alcatel-lucent.com association alcatel-
sales endpoint 3
S.No Transaction Id
-------+-----------------------
1 13357,
2 13358,
3 13359,
Release History
Release 6.6.1; command was introduced.
output definitions
S.No Indicates the sequence number.
Transaction Id Indicates the Transaction Identifier returned from a previously trans-
mitted LTM.