Ethernet OAM Commands
page 25-54 OmniSwitch 6250 CLI Reference Guide November 2009
show ethoam statistics
Displays the Ethernet OAM statistics of all the Management Domains configured on the bridge. Also,
displays the statistics of all the MAs and matching MEPs for all the MDs.
show ethoam statistics [domain {domain_name | mac_address}] [association association_name] [end-
point endpoint_id]
Syntax Definitions
domain_name Specifies the domain name.
mac_address Specifies the CFM system MAC address.
association_name Specifies the name of Ethernet OAM Association.
endpoint_id Specifies a MEP for a specific MA.
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
N/A
Examples
-> show ethoam statistics domain esd.alcatel-lucent.com association alcatel-sales
MEP-ID CCM CCM Seq LBR LBR Out LBR LBR Bad Unexpected
Out Error In of order Out MSDU LTR In
------+------+-------+------+--------+------+--------+----------
3 105 0 0 0 0 0 0
output definitions
MEP-Id The MEP ID configured in the specified MA.
CCM Out The total number of CCMs transmitted.
CCM Seq Error The total number of out-of-sequence CCMs received from all remote
MEPs.
LBR In The total number of valid, in-order LBRs received.
LBR Out of order The total number of valid, out-of-order LBRs received.
LBR Out The total number of LBRs transmitted.
LBR Bad MSDU The total number of LBRs received whose mac_service_data_unit did
not match.
Unexpected LTR In The total number of unexpected LTRs received.
To Next Page
Loading...
