LINK OAM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 26-5
Related Commands
MIB Objects
dot3OamTable
dot3OamAdminState
efm-oam port mode Configure a LINK OAM mode on the port or on the range of ports
to active or passive.
show efm-oam configuration Displays the global LINK OAM configuration.
show efm-oam port Displays the status of LINK OAM on all the ports in the system,
along with other relevant information such as OAM mode, opera-
tional status and loopback status of the port.
show efm-oam port detail Displays the configuration and other related parameters for a port.
To Next Page
Loading...
