LINK OAM Commands
page 26-12 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
dot3OamLoopbackTable
dot3OamLoopbackIgnoreRx
efm-oam port remote-loopback
start
Initiates the loopback control PDU towards the peer port to start or
stop the loopback session on the specified port.
show efm-oam port detail Displays the LINK OAM configuration and other related parame-
ters for a port.
show efm-oam port remote
detail
Displays the configuration and details of the related parameters of
the remote port.
To Next Page
Loading...
