LINK OAM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 26-23
efm-oam multiple-pdu-count
Configures the value of multiple PDU count. When multiple PDU count is set to a specific number in case
of any of the threshhold cross events, the same event notification PDU will be transmitted that many times
towards the peer.
efm-oam multiple-pdu-count count
Syntax Definitions
count Specifies the number of PDUs that have to be sent in case of event-noti-
fication TLVs. The range is 1 to 10 PDUs.
Defaults
By default, the PDU-count value is set to 3.
Platforms Supported
OmniSwitch 6250.
Usage Guidelines
N/A
Examples
-> efm-oam multiple-pdu-count 5
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaDot3OamMultiplePduCount
show efm-oam configuration Displays the global LINK OAM configuration.
show efm-oam port remote
detail
Displays the configuration and details of the related parameters of
the remote port.
To Next Page
Loading...
