Setting Up End-User Profiles Managing Switch User Accounts
page 9-34 OmniSwitch 6250/6450 Switch Management Guide May 2012
Setting Up Port Ranges in a Profile
To set up port ranges for a profile, enter the end-user profile port-list command with the relevant profile
name and the desired slots/ports. For example:
-> end-user profile Profile3 port-list 2 3/1-4
In this example, the port list includes all ports in slot 2, and ports 1 through 4 on slot 3. A user with this
profile will be able to manage these ports (depending on the command areas specified in the profile).
To remove a port list, use the no form of the command with the relevant slot number(s). All ports in the
port list on a given slot will be removed. For example:
-> end-user profile Profile3 no port-list 3
In this example, all ports on slot 3 are removed from the profile.
To Next Page
Loading...
