Managing Switch User Accounts Setting Up End-User Profiles
OmniSwitch 6250/6450 Switch Management Guide May 2012 page 9-35
Setting Up VLAN Ranges in a Profile
To set up VLAN ranges for a profile, enter the end-user profile vlan-range command with the relevant
profile name and the desired VLAN range. For example:
-> end-user profile Profile3 vlan-range 2-4 7-8
In this example, the VLAN range includes VLANs 2, 3, 4, 7, and 8. A user with this profile will be able to
manage these VLANs (depending on the command areas specified in the profile).
To remove a VLAN range from a profile, use the no form of the command and the VLAN ID of the start
of the range to be removed. For example:
-> end-user profile Profile3 no vlan-range 7
This command removes VLANs 7 and 8 from Profile3.
To Next Page
Loading...
