Assembling OS6250 Switches Mounting OS6250 Switches
page 4-10 OmniSwitch 6250 Hardware Users Guide September 2015
OS6250-DUAL-MNT - Attaching Two Chassis Side-by-Side
Two chassis can be assembled side-by-side with the power supply trays attached to the back of the chas-
sis, if necessary, for mounting into a standard 19-inch rack as show in the figure below.
Fully Assembled Side-by-Side Chassis Assembly (OS6250-DUAL-MNT)
1 Attach the slot-brackets and slide-brackets to the front and back of the chassis using the attachment
screws (M3 flat head) provided for each bracket.
Attach Slot/Slide-Brackets
Front center mounting brackets.
Rear center brackets.
To Next Page
Loading...
