Mounting OS6400 Switches Rack Mounting Power Supplies
OmniSwitch 6400 Series Hardware Users Guide August 2008 page 3-17
You can also attach the power supplies to the back of an OmniSwitch 6400 Series chassis directly as well
as using cables at the same time, as shown in the diagram below.
Redundant 510W-PoE
Next Steps
Powering On the Switch
To power on the chassis refer to “Connecting Chassis to Power Source” on page 3-18.
Stacking Multiple Switches Into a Virtual On the Switch
To stack multiple switches into a virtual chassis, refer to “Setting Up a Stacked Configuration” on
page 3-9.
17.6 inches
To Next Page
Loading...
