Configuring Service-Based VLAN Stacking Configuring VLAN Stacking
page 6-16 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
Commands Used for ...
ethernet-service mode Changing the active VLAN Stacking mode for the
switch.
ethernet-service Creating SVLANs to tunnel customer or manage-
ment traffic or an IP Multicast VLAN for distrib-
uting multicast traffic.
ethernet-service service-name Creating a VLAN Stacking service and associat-
ing the service with an SVLAN or IP multicast
VLAN.
ethernet-service svlan nni Configuring a switch port as a VLAN Stacking
NNI port and associating the NNI port with an
SVLAN.
ethernet-service nni Configuring a vendor TPID and legacy Spanning
Tree or GVRP support for an NNI port.
ethernet-service sap Creating a VLAN Stacking SAP and associates
the SAP with a VLAN Stacking service name.
ethernet-service sap uni Configuring a switch port as a VLAN Stacking
UNI port and associating the UNI port with a
VLAN Stacking SAP.
ethernet-service sap cvlan Specifying the type of customer traffic that is
accepted on SAP UNI ports.
ethernet-service sap-profile Configures traffic engineering attributes for cus-
tomer traffic that is accepted on SAP UNI ports.
ethernet-service sap sap-profile Associates a VLAN Stacking SAP with a profile.
ethernet-service uni-profile Configures how protocol control frames are pro-
cessed on VLAN Stacking UNI ports.
ethernet-service uni uni-profile Associates a VLAN Stacking UNI port with a
profile.
To Next Page
Loading...
