Alcatel-Lucent OmniSwitch 6800 Series - Verifying 802.1 AB Configuration

Configuring 802.1AB Verifying 802.1AB Configuration
OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008 page 13-11
Verifying 802.1AB Configuration
To display information about the ports configured to handle 802.1AB, use the following show command:
For more information about the resulting display, see Chapter 54, “802.1AB Commands,” in the
OmniSwitch CLI Reference Guide.
show lldp system-statistics Displays system-wide statistics.
show lldp statistics Displays per port statistics.
show lldp local -system Displays local system information.
show lldp local -port Displays per port information.
show lldp local-management-address Displays the local management address information.
show lldp remote-system Displays per local port and information of remote system.