Alcatel-Lucent OmniSwitch 6800 Series - Page 527

Managing Authentication Servers LDAP Servers
OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008 page 25-25
Fields Included for Layer 2 Authentication Only
• Client MAC address: xx:xx:xx:xx:xx:xx:xx (alphanumeric).
• Switch VLAN number client joins in multiple authority mode (0=single authority; 2=multiple author-
ity); variable-length digits.
• Switch slot number to which client connects: nn
• Switch port number to which client connects: nn
• Switch virtual interface to which client connects: nn
AccountStopTime
User account stop times are tracked in the AccountStopTime attribute that keeps the time stamp and
accounting information of successful user log-outs. The same fields as above (separated by carriage
returns “|”) are contained in the Logout log. A different carriage return such as the # sign may be used in
some situations. Additionally, these fields are included but apply only to the Logout log:
Fields For Any Type of Authentication
• Log-out reason code, for example LOGOFF(18) or DISCONNECTED BY ADMIN(19)
• User account ID or username client entered to log-in: variable length digits.
Fields For Layer 2 Authentication Only
• Number of bytes received on the port during the client’s session from log-in to log-out: variable length
digits.
• Number of bytes sent on the port during the client’s session from log-in to log-out: variable length
digits.
• Number of frames received on the port during the client’s session from log-in to log-out: variable
length digits.
• Number of frames sent on the port during the clients session from log-in to log-out: variable length
digits.
AccountFailTime
The AccountFailTime attribute log records the time stamp and accounting information of unsuccessful
user log-ins. The same fields in the Login Log—which are also part of the Logout log (separated by
carriage returns “|”)—are contained in the Login Fail log. A different carriage return such as the # sign
may be used in some situations. Additionally, these fields are included but apply only to the Login Fail
log.
• User account ID or username client entered to log-in: variable length digits.
• Log-in fail error code: nn. For error code descriptions refer to the vendor-specific listing for the
specific directory server in use.
• Log-out reason code, for example PASSWORD EXPIRED(7) or AUTHENTICATION FAILURE(21).