Setting Up Authentication Clients Configuring Authenticated VLANs
page 26-18 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
4 From this window you may install the client at the default destination folder shown on the screen or
you may click the Browse button to select a different directory. Click on the Next button. The software
loads, and the following window displays.
5 This window recommends that you read a text file included with the client before you exit the install
shield. Click on the box next to “View the single sign-on Notes” to select this option. Click on the Finish
button to end the installation process. Remember that you must restart your computer before you can run
the AV-Client.
To Next Page
Loading...
