Quick Steps for Configuring Access Guardian Policies Configuring 802.1X
page 27-6 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
block
Device classification policies on 802.1x port 2/47
Supplicant:
authentication, block
Non-Supplicant:
block
Device classification policies on 802.1x port 2/48
Supplicant:
authentication, vlan 247, default-vlan
Non-Supplicant:
authentication:
pass: group-mobility, block
fail: strict-vlan 347, default-vlan
To display the number of non-802.1x users learned on the switch, use the show 802.1x non-supplicant
command:
-> show 802.1x non-supplicant
Slot MAC Authentication Classification Vlan
Port Address Status Policy Learned
-----+-----------------+----------------+--------------+--------
03/3 00:61:22:15:22:33 Failed Vlan ID 1001
03/3 00:61:22:44:75:66 Authenticated MAC Authent 14
03/11 00:00:39:47:4f:0c Failed Vlan ID 1001
03/11 00:00:39:c9:5a:0c Authenticated Group Mobility 12
03/11 00:b0:d0:52:47:35 Authenticated Group Mobility 12
03/11 00:c0:4f:0e:70:68 Authenticated MAC Authent 14
See the OmniSwitch CLI Reference Guide for information about the fields in this display.
To Next Page
Loading...
