Configuring the Server Farm Configuring Server Load Balancing
page 34-16 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
5 Select MS Loopback Adapter in the Select Network Adapter window.
6 Click the OK button.
7 Select the proper frame type in the Frame Type pull-down menu.
8 Click the OK button.
9 Load the CD or floppy disc with the Microsoft loopback adapter.
10 If needed, enter the file and path name of the Microsoft loopback adapter in the Windows NT Setup
window.
11 Click the Continue button. All the necessary files will be copied and installed on your workstation.
Select “MS Loopback
Adapter”.
Click “OK” when
done.
Select “Frame Type”.
Click “OK” when
done.
Click “Continue” when
done.
Enter the file and path name
here.
To Next Page
Loading...
