Command Help Using the CLI
page 5-6 OmniSwitch 6800/6850/9000 Switch Management Guide December 2007
The following table contains the first-level commands and their set names as they are listed on the display
screen when you enter a single question mark and press Enter.
Command Set Name Commands
System Service &
File Management
WHOAMI, WHO, VIEW, VI, VERBOSE, USER, UPDATE, TTY,
TELNET6, TELNET, SYSTEM, SWLOG, SSH6, SSH, SHOW,
SFTP6, SFTP, SESSION, RZ, RMDIR, RM, RENAME, PWD,
PROMPT, NTP, NSLOOKUP, NO, NEWFS, MV, MOVE, MORE,
MODIFY, MKDIR, LS, KILL, IP,
HISTORY, FTP, FSCK, FREESPACE, EXIT, DSHELL, DIR,
DELETE, DEBUG, CP, COMMAND-LOG, CHMOD, CD, AUTO,
ATTRIB, ALIAS
CMM Chassis Supervision COPY, WRITE, POWER, TEMP-THRESHOLD, TAKEOVER,
SYSTEM, SHOW, RRM, RPUT, RLS, RGET, RELOAD, RDF,
RCP, NO, DEBUG, CONFIGURE
Source Learning SOURCE-LEARNING, SHOW, PORT-SECURITY, NO, MAC-
ADDRESS-TABLE, DEBUG
Spanning Tree SHOW, BRIDGE
VLAN VLAN, SHOW, NO, MAC-ADDRESS-TABLE, DEBUG
Link Aggregation STATIC, SHOW, NO, LINKAGG, LACP
Miscellaneous HTTP, TRACEROUTE, SNMP, SHOW, RMON, PORT, POLICY,
PING, NO, MAC-RANGE, MAC, LANPOWER, IP, IPV6, ICMP,
HTTPS, HRE, HEALTH, GMAP, DEBUG, CLEAR, ARP, AMAP,
802.1X
AAA & Configuration
Manager
USER, SHOW, PASSWORD, NO, END-USER, DEBUG,
CONFIGURATION, AVLAN, AAA
Interface TRAP, SHOW, NO, INTERFACES, FLOW, DEBUG, 10GIG
IP Routing & Multicast DEBUG, VRRP3, VRRP, TRACEROUTE6, SHOW, PING6, NO,
IPV6, IP, CLEAR
QoS SHOW, QOS, POLICY, NO, DEBUG
Debug UPDATE, SHOW, NO, DEBUG
To Next Page
Loading...
