Logging Into the Switch Login Specifications
OmniSwitch 6800/6850/9000 Switch Management Guide December 2007 page 2-3
Login Specifications
Note. The functionality described in this chapter is supported on the OmniSwitch 6800, 6850, and 9000
switches unless otherwise stated in the following Specifications table or specifically noted within any
section of this chapter.
Login Defaults
Access to managing the switch is always available for the admin user through the console port, even if
management access to the console port is disabled.
Telnet clients supported Any standard Telnet client
FTP clients supported Any standard FTP client
HTTP (WebView) clients supported
– Internet Explorer for Windows NT, Windows
XP, and Windows 2000, version 6.0
– Netscape for Windows NT, Windows XP, and
Windows 2000, version 7.1
– Netscape for Sun OS 2.8, version 4.79
– Netscape for HP-UX 11.0, version 4.79
Secure Shell clients supported Any standard Secure Shell client (Secure Shell
Version 2)
Secure Shell DSA public key authentication Password
DSA Public Key
SNMP clients supported Any standard SNMP manager (such as HP Open-
View)
Parameter Description Command Default
Session login attempts allowed
before the TCP connection is
closed.
session login-attempt 3 attempts
Time-out period allowed for
session login before the TCP
connection is closed.
session login-timeout 55 seconds
Inactivity time-out period. The
length of time the switch can
remain idle during a login
session before the switch will
close the session.
session timeout 4 minutes
To Next Page
Loading...
