OmniSwitch AOS Release 6 Network Configuration Guide September 2009 page xliii
About This Guide
This OmniSwitch AOS Release 6 Network Configuration Guide describes how to set up and monitor soft-
ware features that will allow your switch to operate in a live network environment. The software features
described in this manual are shipped standard with your OmniSwitch 6400 Series, OmniSwitch 6850
Series, OmniSwitch 6855 Series, OmniSwitch 9000 Series, and OmniSwitch 9000E Series switches. These
features are used when setting up your OmniSwitch in a network of switches and routers.
Supported Platforms
The information in this guide applies to the following products:
• OmniSwitch 9000 Series (9600, 9700, and 9800 switches)
• OmniSwitch 9000E Series (9700E and 9800E switches)
• OmniSwitch 6400 Series
• OmniSwitch 6850 Series
• OmniSwitch 6855 Series
Note. This OmniSwitch AOS Release 6 Network Configuration Guide covers Release 6.4.2, which is
supported on the the OmniSwitch 6400 Series, OmniSwitch 6850 Series, OmniSwitch 6855 Series,
OmniSwitch 9000 Series, and OmniSwitch 9000E Series.
Unsupported Platforms
The information in this guide does not apply to the following products:
• OmniSwitch (original version with no numeric model name)
• OmniSwitch 6600 Family
• OmniSwitch 6800 Family
• OmniSwitch 7700/7800
• OmniSwitch 8800
• Omni Switch/Router
• OmniStack
• OmniAccess
To Next Page
Loading...
