Alcatel-Lucent OmniSwitch 6850-48 - VRF Specifications; VRF Defaults

VRF Specifications Configuring Multiple VRF
page 25-2 OmniSwitch AOS Release 6 Network Configuration Guide September 2009
VRF Specifications
The multiple VRF functionality described in this chapter is supported on the OmniSwitch 6855-U24X and
9000E series switches. Note that any maximum limits provided in the Specifications table are subject to
available system resources.
VRF Defaults
Routing Protocols Supported Static, IPv4, RIPv2, OSPFv2,BGP4
Maximum VRF instances per switch 8 (OmniSwitch 6855-U24X)
64 (OmniSwitch 9000E)
Maximum VRF instances per VLAN 1
Maximum OSPFv2 VRF
routing instances per switch
8 (OmniSwitch 6855-U24X)
16 (OmniSwitch 9000E)
Maximum RIPv2 VRF
routing instances per switch
8 (OmniSwitch 6855-U24X)
16 (OmniSwitch 9000E)
Maximum BGP VRF routing instances per
switch
8 (OmniSwitch 6855-U24X)
32 (OmniSwitch 9000E)
SNMP version required for management SNMPv3
Parameter Description Command Default Value/Comments
Active VRF instance vrf Default VRF instance