Alcatel-Lucent OmniSwitch 6850-48

To Next Page

To Previous Page

Quick Steps for Configuring BFD Configuring BFD

page 30-8 OmniSwitch AOS Release 6 Network Configuration Guide September 2009

Dest Address Subnet Mask Gateway Addr Age Protocol

------------------+-----------------+-----------------+---------+-----------

20.20.20.0 255.255.255.0 20.20.20.10 01:56:01 LOCAL

32.32.32.0 255.255.255.0 *20.20.20.152 00:00:01 NETMGMT

60.60.60.0 255.255.255.0 *20.20.20.152 00:01:22 NETMGMT

70.70.70.0 255.255.255.0 70.70.70.151 00:01:22 LOCAL

71.71.71.0 255.255.255.0 71.71.71.151 00:01:22 LOCAL

78.78.78.0 255.255.255.0 *80.80.80.142 00:01:22 NETMGMT

79.79.79.0 255.255.255.0 79.79.79.151 00:01:23 LOCAL

127.0.0.1 255.255.255.255 127.0.0.1 01:57:15 LOCAL

See the “IP Commands” chapter in the OmniSwitch CLI Reference Guide for information about the fields

in this display.

Main Page

Default Chapter3
- Table of Contents3
About this Guide43
- Supported Platforms43
- What Is in this Manual44
- When Should I Read this Manual44
- Who Should Read this Manual44
- How Is the Information Organized45
- What Is Not in this Manual45
- Documentation Roadmap46
- Related Documentation48
- Technical Support50
- User Manual CD50
Chapter 1 Configuring Ethernet Ports51
- In this Chapter51
- Ethernet Specifications52
- Ethernet Port Defaults52
- Non-Combo Port Defaults53
- Combo Ethernet Port Defaults53
- Ethernet Ports Overview54
- Setting Ethernet Parameters for All Port Types60
- Setting Ethernet Parameters for Non-Combo Ports66
- Setting Ethernet Combo Port Parameters71
- Combo Port Application Example79
- Verifying Ethernet Port Configuration81
Chapter 2 Managing Source Learning83
- In this Chapter83
- Source Learning Specifications84
- Source Learning Defaults84
- Sample MAC Address Table Configuration85
- MAC Address Table Overview87
- Using Static MAC Addresses87
  - Configuring Static MAC Addresses88
    - Static MAC Addresses on Link Aggregate Ports88
- Using Static Multicast MAC Addresses89
  - Configuring Static Multicast MAC Addresses89
    - Static Multicast MAC Addresses on Link Aggregate Ports90
  - ASCII-File-Only Syntax90
- Configuring MAC Address Table Aging Time91
- Increasing the MAC Address Table Size92
- Displaying Source Learning Information93
- In this Chapter95
Chapter 3 Configuring Learned Port Security96
- Learned Port Security Specifications96
- Learned Port Security Defaults96
- Sample Learned Port Security Configuration97
- Learned Port Security Overview98
- Configuring Learned Port Security100
- Displaying Learned Port Security Information106
- Configuring Vlans107
Chapter 4 Configuring Vlans107
- In this Chapter107
- VLAN Specifications108
- VLAN Defaults108
- Sample VLAN Configuration110
- VLAN Management Overview111
- Creating/Modifying Vlans112
- Defining VLAN Port Assignments114
  - Changing the Default VLAN Assignment for a Port114
  - Configuring Dynamic VLAN Port Assignment115
    - Configuring VLAN Rule Classification115
    - Enabling/Disabling VLAN Mobile Tag Classification116
- Enabling/Disabling Spanning Tree for a VLAN117
- Enabling/Disabling VLAN Authentication118
- Enabling/Disabling Source Learning118
- Configuring VLAN Router Interfaces118
  - Configuring an IPX Router Interface119
    - Modifying an IPX Router Interface120
  - What Is Single MAC Router Mode120
- Bridging Vlans Across Multiple Switches121
- Verifying the VLAN Configuration122
- In this Chapter123
Chapter 5 Configuring GVRP124
- GVRP Specifications124
- GVRP Defaults124
- GARP Overview125
- GVRP Overview125
- Quick Steps for Configuring GVRP127
- Configuring GVRP129
- Verifying GVRP Configuration135
Chapter 6 Assigning Ports to Vlans137
- In this Chapter137
- Port Assignment Specifications138
- Port Assignment Defaults138
- Sample VLAN Port Assignment139
- Statically Assigning Ports to Vlans140
- Dynamically Assigning Ports to Vlans140
- Understanding Mobile Port Properties148
Chapter 45 Diagnosing Switch Problems155
- Verifying VLAN Port Associations and Mobile Port Properties155
Chapter 7 Configuring Port Mapping158
- Port Mapping Specifications158
- Port Mapping Defaults158
- Quick Steps for Configuring Port Mapping158
- Creating/Deleting a Port Mapping Session159
  - Creating a Port Mapping Session159
    - Deleting a User/Network Port of a Session159
  - Deleting a Port Mapping Session159
- Enabling/Disabling a Port Mapping Session160
- Configuring a Port Mapping Direction160
  - Configuring Unidirectional Port Mapping160
  - Restoring Bidirectional Port Mapping161
- Sample Port Mapping Configuration161
  - Example Port Mapping Overview161
  - Example Port Mapping Configuration Steps162
- Verifying the Port Mapping Configuration162
Chapter 8 Defining VLAN Rules163
- In this Chapter163
- Defining VLAN Rules164
- VLAN Rules Specifications164
- VLAN Rules Defaults164
- Sample VLAN Rule Configuration165
- VLAN Rules Overview166
  - VLAN Rule Types166
  - Understanding VLAN Rule Precedence170
- Configuring VLAN Rule Definitions172
- Application Example: DHCP Rules181
  - The Vlans181
  - DHCP Servers and Clients181
- Verifying VLAN Rule Configuration184
Chapter 9 Configuring VLAN Stacking185
- In this Chapter185
- Configuring VLAN Stacking186
- VLAN Stacking Specifications186
- VLAN Stacking Defaults186
- VLAN Stacking Overview187
  - How VLAN Stacking Works189
  - VLAN Stacking Services190
- Interaction with Other Features191
- Quick Steps for Configuring VLAN Stacking193
- Configuring VLAN Stacking Services195
- VLAN Stacking Application Example205
  - VLAN Stacking Configuration Example206
- Verifying the VLAN Stacking Configuration208
- 10 Configuring MPLS209
Chapter 10 Configuring MPLS209
- In this Chapter209
- MPLS Specifications210
- MPLS Defaults211
- Quick Steps for Configuring MPLS212
- MPLS Overview220
- Interaction with Other Features224
- Interoperability with Alcatel-Lucent SR Series225
- Configuring MPLS225
- MPLS Application Example238
  - Example Network Overview238
  - Configuring the Example MPLS Network239
    - Configuring Example VPLS Services245
- Verifying the MPLS Configuration249
Chapter 11 Configuring VPLS251
- In this Chapter251
- VPLS Specifications252
- VPLS Defaults253
- Quick Steps for Configuring VPLS254
- VPLS Overview257
- Interaction with Other Features261
- Interoperability with Alcatel-Lucent SR Series263
- Configuring VPLS Services265
- VPLS Configuration Example276
- Verifying the VPLS Configuration282
- In this Chapter283
Chapter 12 Using 802.1Q 2005 Multiple Spanning Tree284
- Spanning Tree Specifications284
- Spanning Tree Bridge Parameter Defaults284
- Spanning Tree Port Parameter Defaults285
- Multiple Spanning Tree Region Defaults285
- MST General Overview286
- MST Configuration Overview292
  - Using Spanning Tree Configuration Commands292
  - Understanding Spanning Tree Modes293
- MST Interoperability and Migration294
  - Migrating from Flat Mode STP/RSTP to Flat Mode MSTP294
  - Migrating from 1X1 Mode to Flat Mode MSTP295
- Quick Steps for Configuring an MST Region296
- Quick Steps for Configuring Mstis298
- Verifying the MST Configuration301
Chapter 13 Configuring Spanning Tree Parameters303
- In this Chapter304
- Spanning Tree Specifications305
- Spanning Tree Bridge Parameter Defaults306
- Spanning Tree Port Parameter Defaults306
- Multiple Spanning Tree (MST) Region Defaults307
- Ring Rapid Spanning Tree Defaults307
- Spanning Tree Overview308
  - How the Spanning Tree Topology Is Calculated308
    - Bridge Protocol Data Units (BPDU)310
    - Topology Examples312
- Spanning Tree Operating Modes314
- Configuring STP Bridge Parameters319
- Configuring STP Port Parameters328
- Using RRSTP340
- Sample Spanning Tree Configuration342
  - Example Network Overview342
  - Example Network Configuration Steps343
- Verifying the Spanning Tree Configuration345
- 14 Configuring ERP347
Chapter 14 Configuring ERP347
- In this Chapter347
- ERP Specifications348
- ERP Defaults348
- ERP Overview349
- Interaction with Other Features354
- Quick Steps for Configuring ERP with Standard Vlans355
- Quick Steps for Configuring ERP with VLAN Stacking356
- ERP Configuration Overview and Guidelines357
- Configuring an ERP Ring358
- Sample Ethernet Ring Protection Configuration365
  - Example ERP Overview365
  - Example ERP Configuration Steps366
- Verifying the ERP Configuration367
Chapter 15 Configuring Ethernet OAM369
- In this Chapter369
- Ethernet OAM Specifications370
- Ethernet OAM Defaults370
- Ethernet OAM Overview372
  - Connectivity Fault Management372
    - MIP CCM Database Support374
- Quick Steps for Configuring Ethernet OAM375
- Configuring Ethernet OAM376
- Verifying the Ethernet OAM Configuration380
Chapter 16 Configuring EFM (LINK OAM)381
- In this Chapter381
- LINK OAM Specifications382
- LINK OAM Defaults383
- Quick Steps for Configuring LINK OAM384
- LINK OAM Overview386
- Interaction with Other Features388
- Configuring LINK OAM389
- Configuring Link Monitoring390
- Configuring LINK OAM Loopback391
  - Enabling and Disabling Remote Loopback391
- Verifying the LINK OAM Configuration392
Chapter 17 Configuring UDLD393
- In this Chapter393
- UDLD Specifications394
- UDLD Defaults394
- Quick Steps for Configuring UDLD395
- UDLD Overview396
  - UDLD Operational Mode396
    - Aggressive Mode396
    - Normal Mode396
  - Mechanisms to Detect Unidirectional Links397
    - Echo Detection397
    - Neighbor Database Maintenance397
- Configuring UDLD398
- Verifying the UDLD Configuration401
Chapter 18 Configuring MAC Retention403
- In this Chapter403
- MAC Retention Defaults404
- MAC Retention Overview405
  - How MAC Retention Works406
  - MAC Retention after Multiple Take-Overs407
- Configuring MAC Retention408
- MAC Retention Applications409
  - Software Failure409
  - Link Failure410
Chapter 19 Configuring 802.1AB411
- In this Chapter411
- 802.1AB Specifications412
- 802.1AB Defaults Table412
- Quick Steps for Configuring 802.1AB413
- 802.1AB Overview414
- Configuring 802.1AB418
- Verifying 802.1AB Configuration422
- Using Interswitch Protocols423
- In this Chapter423
Chapter 20 Using Interswitch Protocols424
- AIP Specifications424
- AMAP Defaults424
- AMAP Overview425
  - AMAP Transmission States425
  - Common Transmission and Remote Switches427
- Configuring AMAP427
Chapter 21 Configuring 802.1Q431
- In this Chapter431
- 802.1Q Specifications432
- 802.1Q Defaults Table432
- 802.1Q Overview433
- Configuring an 802.1Q VLAN435
- Application Example438
- Verifying 802.1Q Configuration440
Chapter 22 Configuring Static Link Aggregation441
- In this Chapter441
- Configuring Static Link Aggregation442
- Static Link Aggregation Specifications442
- Static Link Aggregation Default Values442
- Quick Steps for Configuring Static Link Aggregation443
- Static Link Aggregation Overview445
  - Static Link Aggregation Operation445
  - Relationship to Other Features446
- Configuring Static Link Aggregation Groups447
- Modifying Static Aggregation Group Parameters450
  - Modifying the Static Aggregate Group Name450
    - Creating a Static Aggregate Group Name450
    - Deleting a Static Aggregate Group Name450
  - Modifying the Static Aggregate Group Administrative State450
    - Disabling the Static Aggregate Group Administrative State450
    - Enabling the Static Aggregate Group Administrative State450
- Application Example451
- Displaying Static Link Aggregation Configuration and Statistics452
- Configuring Dynamic Link Aggregation453
Chapter 23 Configuring Dynamic Link Aggregation453
- In this Chapter453
- Dynamic Link Aggregation Specifications454
- Dynamic Link Aggregation Default Values455
- Quick Steps for Configuring Dynamic Link Aggregation456
- Dynamic Link Aggregation Overview459
  - Dynamic Link Aggregation Operation459
  - Relationship to Other Features461
- Configuring Dynamic Link Aggregate Groups462
- Modifying Dynamic Link Aggregate Group Parameters466
- Application Examples481
- Displaying Dynamic Link Aggregation Configuration and Statistics484
Chapter 24 Configuring IP487
- In this Chapter487
- IP Specifications489
- IP Defaults489
- Quick Steps for Configuring IP Forwarding490
- IP Overview491
  - IP Protocols491
Chapter 42 Configuring IP Multicast Switching492
- IP Forwarding493
- IP Configuration502
- Managing IP515
- Verifying the IP Configuration522
Chapter 25 Configuring Multiple VRF523
- In this Chapter523
- VRF Specifications524
- VRF Defaults524
- Quick Steps for Configuring Multiple VRF525
- Multiple VRF Overview528
- VRF Interaction with Other Features531
- Configuring VRF Instances535
- Verifying the VRF Configuration538
Chapter 26 Configuring Ipv6539
- In this Chapter539
- Ipv6 Specifications540
- Ipv6 Defaults541
- Quick Steps for Configuring Ipv6 Routing542
- Ipv6 Overview543
  - Ipv6 Addressing544
- Configuring an Ipv6 Interface551
- Assigning Ipv6 Addresses553
  - Removing an Ipv6 Address554
- Configuring Ipv6 Tunnel Interfaces555
- Creating an Ipv6 Static Route556
  - Configuring the Route Preference of a Router557
  - Configuring Route Map Redistribution558
- Verifying the Ipv6 Configuration564
Chapter 27 Configuring Ipsec565
- In this Chapter565
- Ipsec Specifications566
Index566
- Ipsec Defaults567
- Quick Steps for Configuring an Ipsec AH Policy568
- Quick Steps for Configuring an Ipsec Discard Policy569
- Ipsec Overview570
- Configuring Ipsec on the Omniswitch575
- Verifying Ipsec Configuration587
Chapter 28 Configuring RIP589
- In this Chapter589
- RIP Specifications590
- RIP Defaults590
- Quick Steps for Configuring RIP Routing591
- RIP Overview592
  - RIP Version 2593
- RIP Routing594
- RIP Options597
- Configuring Redistribution600
- RIP Security606
  - Configuring Authentication Type606
  - Configuring Passwords606
- Verifying the RIP Configuration607
Chapter 29 Configuring RDP609
- In this Chapter609
- RDP Specifications610
- RDP Defaults610
- Quick Steps for Configuring RDP611
- RDP Overview613
  - RDP Interfaces614
  - Security Concerns615
- Enabling/Disabling RDP616
- Creating an RDP Interface616
- Verifying the RDP Configuration619
Chapter 30 Configuring BFD621
- In this Chapter621
- BFD Specifications622
- BFD Defaults623
- Quick Steps for Configuring BFD624
  - Quick Steps for Configuring BFD Support for Layer 3 Protocols626
- BFD Overview629
- Configuring BFD633
  - Configuring BFD Session Parameters633
  - Configuring BFD Support for Layer 3 Protocols638
- BFD Application Example645
- Verifying the BFD Configuration651
Chapter 31 Configuring DHCP Relay653
- In this Chapter653
- DHCP Relay Specifications654
- DHCP Relay Defaults655
- Quick Steps for Setting up DHCP Relay656
- DHCP Relay Implementation661
- Using Automatic IP Configuration664
  - Enabling Automatic IP Configuration664
- Configuring UDP Port Relay665
  - Enabling/Disabling UDP Port Relay666
  - Specifying a Forwarding VLAN666
- Configuring DHCP Security Features667
  - Using the Relay Agent Information Option (Option-82)667
  - Using DHCP Snooping670
- Verifying the DHCP Relay Configuration677
Chapter 32 Configuring VRRP679
- In this Chapter679
- VRRP Specifications681
- VRRP Defaults681
- Quick Steps for Creating a Virtual Router683
- VRRP Overview684
- VRRP Configuration Overview688
- Verifying the VRRP Configuration696
- Vrrpv3 Configuration Overview697
- Verifying the Vrrpv3 Configuration702
- Creating Tracking Policies703
  - Associating a Tracking Policy with a Vrrpv2/Vrrpv3 Virtual Router703
- VRRP Application Example704
- VRRP Tracking Example706
- Vrrpv3 Application Example708
  - Vrrpv3 Tracking Example709
Chapter 33 Configuring IPX711
- In this Chapter711
- IPX Specifications712
- IPX Defaults712
- Quick Steps for Configuring IPX Routing713
- IPX Overview714
- IPX Routing716
- IPX RIP/SAP Filtering721
- Verifying the IPX Configuration725
Chapter 34 Configuring Access Guardian727
- In this Chapter727
- Access Guardian Specifications729
- Access Guardian Defaults730
- Quick Steps for Configuring Access Guardian731
- Access Guardian Overview738
- Configuring Access Guardian Policies748
- Configuring Captive Portal Authentication758
- Configuring Host Integrity Check765
- Configuring User Network Profiles766
  - Configuring Qos Policy Lists766
  - Configuring User Network Profile Mobile Rules767
- Verifying Access Guardian Users768
  - Logging Users out of the Network770
- Verifying the Access Guardian Configuration771
- In this Chapter773
Chapter 35 Managing Authentication Servers774
- Authentication Server Specifications774
- Server Defaults775
- Quick Steps for Configuring Authentication Servers776
- Server Overview777
- Ace/Server780
  - Clearing an Ace/Server Secret780
- RADIUS Servers781
  - RADIUS Server Attributes781
  - Configuring the RADIUS Client786
- TACACS+ Server787
  - TACACS+ Client Limitations787
  - Configuring the TACACS+ Client788
- LDAP Servers789
- Verifying the Authentication Server Configuration801
Chapter 36 Configuring Authenticated Vlans803
- Authenticated Network Overview804
- AVLAN Configuration Overview806
  - Sample AVLAN Configuration807
- Setting up Authentication Clients809
Configuring Authenticated Vlans828
- Removing a User from an Authenticated Network828
- Configuring Authentication IP Addresses829
- Setting up the Default VLAN for Authentication Clients829
- Port Binding and Authenticated Vlans830
- Configuring Authenticated Ports830
- Setting up a DNS Path831
- Setting up the DHCP Server831
  - Enabling DHCP Relay for Authentication Clients832
  - Configuring a DHCP Gateway for the Relay833
- Configuring the Server Authority Mode834
  - Configuring Single Mode834
  - Configuring Multiple Mode836
- Specifying Accounting Servers837
- User Network Profile838
- Verifying the AVLAN Configuration839
Chapter 37 Configuring 802.1X841
- In this Chapter841
- X Specifications842
- X Defaults842
- Quick Steps for Configuring 802.1X843
- X Overview845
- Setting up Port-Based Network Access Control848
- Verifying the 802.1X Port Configuration852
- In this Chapter853
Chapter 38 Managing Policy Servers854
- Policy Server Specifications854
- Policy Server Defaults854
- Policy Server Overview855
- Installing the LDAP Policy Server855
- Modifying Policy Servers856
- Verifying the Policy Server Configuration859
Chapter 39 Using ACL Manager861
- In this Chapter861
- ACLMAN Defaults862
- Quick Steps for Creating Acls863
- Quick Steps for Importing ACL Text Files864
- ACLMAN Overview865
- Using the ACLMAN Shell867
- ACLMAN Modes and Commands868
- Supported Protocols and Services875
- Configuring Acls876
- Verifying the ACLMAN Configuration882
  - Using Alcatel-Lucent CLI to Display ACLMAN Policies882
Chapter 40 Configuring Qos883
- In this Chapter883
- Qos Specifications884
- Qos General Overview885
- Qos Policy Overview886
- Condition Combinations888
- Action Combinations890
- Condition and Action Combinations891
- Qos Defaults892
- Qos Configuration Overview895
- Configuring Global Qos Parameters896
- Qos Ports and Queues906
- Creating Policies913
- Using Condition Groups in Policies924
- Using Map Groups933
- Applying the Configuration936
- Policy Applications939
Chapter 41 Configuring Acls947
- In this Chapter947
- ACL Specifications948
- ACL Defaults949
- Quick Steps for Creating Acls950
- ACL Overview951
  - How Precedence Is Determined952
    - Interaction with Other Features952
    - Rule Precedence952
  - Valid Combinations952
- ACL Configuration Overview953
- Setting the Global Disposition953
- Creating Condition Groups for Acls954
  - Configuring Acls955
  - Creating Policy Conditions for Acls955
  - Creating Policy Actions for Acls956
  - Creating Policy Rules for Acls957
  - Layer 2 Acls957
    - Layer 2 ACL Example958
  - Layer 3 Acls958
    - Layer 3 ACL: Example 1959
    - Layer 3 ACL: Example 2959
  - Ipv6 Acls959
  - Multicast Filtering Acls960
- Using ACL Security Features962
  - Configuring a Userports Group962
    - Configuring Userport Traffic Types and Port Behavior963
  - Configuring a Dropservices Group963
  - Configuring a Bpdushutdownports Group964
  - Configuring ICMP Drop Rules965
  - Configuring TCP Connection Rules965
- Verifying the ACL Configuration966
- ACL Application Example968
- In this Chapter969
- IPMS Specifications971
- Ipmsv6 Specifications971
- IPMS Default Values972
- Ipmsv6 Default Values973
- IPMS Overview974
  - IPMS Example974
  - Reserved IP Multicast Addresses975
  - IP Multicast Routing975
    - Dvmrp976
    - IGMP Version 3976
- Configuring IPMS on a Switch977
  - Enabling and Disabling IP Multicast Status977
    - Enabling IP Multicast Status977
  - Enabling and Disabling IGMP Querier-Forwarding978
    - Disabling the IGMP Querier-Forwarding978
    - Enabling the IGMP Querier-Forwarding978
  - Configuring and Restoring the IGMP Version978
    - Configuring the IGMP Version979
    - Restoring the IGMP Version979
  - Configuring and Removing an IGMP Static Neighbor979
    - Configuring an IGMP Static Neighbor979
    - Removing an IGMP Static Neighbor980
  - Configuring and Removing an IGMP Static Querier980
    - Configuring an IGMP Static Querier980
  - Configuring and Removing an IGMP Static Group980
    - Configuring an IGMP Static Group981
    - Removing an IGMP Static Group981
- Modifying IPMS Parameters982
  - Modifying the IGMP Query Interval982
    - Configuring the IGMP Query Interval982
    - Restoring the IGMP Query Interval982
  - Modifying the IGMP Last Member Query Interval982
    - Configuring the IGMP Last Member Query Interval983
    - Restoring the IGMP Last Member Query Interval983
  - Modifying the IGMP Query Response Interval983
    - Configuring the IGMP Query Response Interval983
    - Restoring the IGMP Query Response Interval984
  - Modifying the IGMP Router Timeout984
  - Enabling and Disabling IGMP Querying986
    - Disabling the IGMP Querying986
    - Enabling the IGMP Querying986
  - Modifying the IGMP Robustness Variable986
    - Configuring the IGMP Robustness Variable986
    - Restoring the IGMP Robustness Variable987
  - Enabling and Disabling the IGMP Spoofing987
    - Enabling the IGMP Spoofing987
  - Enabling and Disabling the IGMP Zapping988
    - Enabling the IGMP Zapping988
  - Limiting IGMP Multicast Groups989
    - Setting the IGMP Group Limit989
- Ipmsv6 Overview990
  - Ipmsv6 Example990
  - Reserved Ipv6 Multicast Addresses991
  - MLD Version 2991
- Configuring Ipmsv6 on a Switch992
  - Enabling and Disabling Ipv6 Multicast Status992
    - Enabling Ipv6 Multicast Status992
  - Enabling and Disabling MLD Querier-Forwarding993
    - Disabling the MLD Querier-Forwarding993
    - Enabling the MLD Querier-Forwarding993
  - Configuring and Restoring the MLD Version993
    - Configuring the MLD Version 2993
    - Restoring the MLD Version 1994
  - Configuring and Removing an MLD Static Neighbor994
    - Configuring an MLD Static Neighbor994
    - Removing an MLD Static Neighbor995
  - Configuring and Removing an MLD Static Querier995
    - Configuring an MLD Static Querier995
  - Configuring and Removing an MLD Static Group995
    - Configuring an MLD Static Group996
    - Removing an MLD Static Group996
- Modifying Ipmsv6 Parameters997
  - Modifying the MLD Query Interval997
    - Configuring the MLD Query Interval997
    - Restoring the MLD Query Interval997
  - Modifying the MLD Last Member Query Interval997
    - Configuring the MLD Last Member Query Interval997
    - Restoring the MLD Last Member Query Interval998
  - Modifying the MLD Query Response Interval998
    - Configuring the MLD Query Response Interval998
    - Restoring the MLD Query Response Interval998
  - Modifying the MLD Router Timeout999
    - Configuring the MLD Router Timeout999
    - Restoring the MLD Router Timeout999
  - Modifying the Source Timeout999
    - Configuring the Source Timeout1000
    - Restoring the Source Timeout1000
  - Enabling and Disabling the MLD Querying1000
    - Enabling the MLD Querying1000
  - Modifying the MLD Robustness Variable1001
    - Configuring the MLD Robustness Variable1001
    - Restoring the MLD Robustness Variable1001
  - Enabling and Disabling the MLD Spoofing1002
    - Enabling the MLD Spoofing1002
  - Enabling and Disabling the MLD Zapping1002
    - Disabling the MLD Zapping1003
    - Enabling the MLD Zapping1003
  - Limiting MLD Multicast Groups1003
    - Setting the MLD Group Limit1003
- IPMS Application Example1005
- Ipmsv6 Application Example1007
- Displaying IPMS Configurations and Statistics1009
- Displaying Ipmsv6 Configurations and Statistics1010
- In this Chapter1011
Chapter 43 Configuring IP Multicast VLAN1012
- IP Multicast VLAN Specifications1012
- IP Multicast VLAN Defaults1012
- IP Multicast VLAN Overview1013
  - VLAN Stacking Mode1013
    - IPMVLAN Lookup Mode1013
  - Enterprise Mode1014
- IPMV Packet Flows1015
  - VLAN Stacking Mode1015
  - Enterprise Mode1018
- Configuring IPMVLAN1019
- IPMVLAN Application Example1023
- Verifying the IP Multicast VLAN Configuration1025
- In this Chapter1027
Chapter 44 Configuring Server Load Balancing1028
- Server Load Balancing Specifications1028
- Server Load Balancing Default Values1029
- Quick Steps for Configuring Server Load Balancing (SLB)1030
  - Quick Steps for Configuring a Qos Policy Condition Cluster1031
- Server Load Balancing Overview1033
  - Server Load Balancing Cluster Identification1033
    - Server Load Balancing Cluster Modes1033
  - Server Load Balancing Example1034
  - Weighted Round Robin Distribution Algorithm1035
  - Server Health Monitoring1036
- Configuring the Server Farm1037
  - Configuring a Windows NT Server1037
  - Configuring a Windows 2000 Server1040
  - Adding the Microsoft Loopback Adapter Driver1042
  - Configuring a Virtual IP Address on a Novell Netware 6 Server1049
- Configuring Server Load Balancing on a Switch1050
  - Enabling and Disabling Server Load Balancing1050
    - Disabling SLB1050
    - Enabling SLB1050
  - Configuring and Deleting SLB Clusters1051
  - Assigning Servers to and Removing Servers from a Cluster1053
    - Assigning a Server to an SLB Cluster1053
    - Removing a Server from an SLB Cluster1053
- Modifying Optional Parameters1054
  - Modifying the Ping Period1054
  - Modifying the Ping Timeout1054
  - Modifying the Ping Retries1055
  - Modifying the Relative Weight of a Physical Server1055
    - Configuring a Server in an SLB Cluster as a Backup Server1055
- Taking Clusters and Servers On/Off Line1056
  - Taking a Cluster On/Off Line1056
    - Bringing an SLB Cluster on Line1056
    - Taking an SLB Cluster off Line1056
  - Taking a Server On/Off Line1056
    - Bringing a Server on Line1056
    - Taking a Server off Line1057
- Configuring SLB Probes1058
  - Creating SLB Probes1058
  - Deleting SLB Probes1058
  - Associating a Probe with a Cluster1058
  - Associating a Probe with a Server1059
  - Modifying SLB Probes1059
- Displaying Server Load Balancing Status and Statistics1062
- In this Chapter1065
- Port Mirroring Overview1067
  - Port Mirroring Specifications1067
  - Port Mirroring Defaults1067
  - Quick Steps for Configuring Port Mirroring1068
- Port Monitoring Overview1069
  - Port Monitoring Specifications1069
  - Port Monitoring Defaults1069
  - Quick Steps for Configuring Port Monitoring1070
- Sflow Overview1071
  - Sflow Specifications1071
  - Sflow Defaults1071
  - Quick Steps for Configuring Sflow1072
- Remote Monitoring (RMON) Overview1074
  - RMON Specifications1074
  - RMON Probe Defaults1075
  - Quick Steps for Enabling/Disabling RMON Probes1075
- Switch Health Overview1076
  - Switch Health Specifications1076
  - Switch Health Defaults1077
  - Quick Steps for Configuring Switch Health1077
- Port Mirroring1078
  - What Ports Can be Mirrored?1078
  - How Port Mirroring Works1078
  - What Happens to the Mirroring Port1079
  - Mirroring on Multiple Ports1079
  - Using Port Mirroring with External RMON Probes1079
  - Remote Port Mirroring1081
  - Creating a Mirroring Session1082
  - Unblocking Ports (Protection from Spanning Tree)1083
  - Enabling or Disabling Mirroring Status1083
  - Disabling a Mirroring Session (Disabling Mirroring Status)1083
  - Configuring Port Mirroring Direction1084
  - Enabling or Disabling a Port Mirroring Session (Shorthand)1084
  - Displaying Port Mirroring Status1085
  - Deleting a Mirroring Session1085
  - Configuring Remote Port Mirroring1086
- Port Monitoring1088
  - Configuring a Port Monitoring Session1089
  - Enabling a Port Monitoring Session1089
  - Disabling a Port Monitoring Session1089
  - Deleting a Port Monitoring Session1089
  - Pausing a Port Monitoring Session1090
  - Configuring Port Monitoring Session Persistence1090
  - Configuring a Port Monitoring Data File1090
  - Suppressing Port Monitoring File Creation1091
  - Configuring Port Monitoring Direction1091
  - Displaying Port Monitoring Status and Data1092
- Sflow1093
  - Sflow Manager1093
  - Receiver1093
  - Sampler1094
  - Poller1094
  - Configuring a Sflow Session1094
  - Configuring a Fixed Primary Address1095
  - Displaying a Sflow Receiver1095
  - Displaying a Sflow Sampler1096
  - Displaying a Sflow Poller1096
  - Displaying a Sflow Agent1097
  - Deleting a Sflow Session1097
- Remote Monitoring (RMON)1098
  - Ethernet Statistics1099
  - History (Control & Statistics)1099
  - Alarm1099
  - Event1099
  - Enabling or Disabling RMON Probes1100
  - Displaying RMON Tables1101
- Monitoring Switch Health1105
  - Configuring Resource and Temperature Thresholds1107
  - Displaying Health Threshold Limits1108
  - Configuring Sampling Intervals1109
  - Viewing Sampling Intervals1109
  - Viewing Health Statistics for the Switch1110
  - Viewing Health Statistics for a Specific Interface1111
  - Resetting Health Statistics for the Switch1111
Chapter 46 Using Switch Logging1113
- In this Chapter1113
- Switch Logging Specifications1114
- Switch Logging Defaults1115
- Quick Steps for Configuring Switch Logging1116
- Switch Logging Overview1117
- Switch Logging Commands Overview1118
Chapter 47 Configuring Network Security1126
- Network Security Specifications1126
- Network Security Defaults1126
- Quick Steps for Configuring Network Security1127
- Network Security Overview1128
  - Anomalies1128
  - Monitoring Group1129
Configuring Network Security1130
- Creating Monitoring-Group and Associating Port Range1130
- Disassociating Port Range from Monitoring-Group1130
- Configuring Anomaly to be Monitored1130
- Verifying Network Security Information1132
Appendix A Software License and Copyright Statements1133
- Alcatel-Lucent License Agreement1133
  - Alcatel-Lucent Software License Agreement1133
- Third Party Licenses and Notices1136

Alcatel-Lucent OmniSwitch 6850-48 - Page 628

Table of Contents

Other manuals for Alcatel-Lucent OmniSwitch 6850-48

Related product manuals