Alcatel-Lucent OmniSwitch 6850-48 - 10;100;1000 Leds; 100;1000 SFP Leds; 10000 XFP1 Leds; 10000 XFP2 Leds

OmniSwitch 6850 Series Chassis and Hardware Components Status LEDs
OmniSwitch 6850 Series Hardware Users Guide September 2009 page 2-55
10/100/1000 LEDs
There is a single LED for each corresponding 10/100/1000 Mbps port. It displays solid green (1000 Mbps)
for a valid link; displays blinking green when transmitting or receiving packets in a link up state for non-
PoE. It displays solid amber (10/100 Mbps) for a valid link; displays blinking amber when transmitting or
receiving packets in a link up state for PoE.
100/1000 SFP LEDs
There is a single LED for 100/1000 Mbps SFP. It displays solid green (1000 Mbps) for a valid link;
displays blinking green when transmitting or receiving packets in a link up state; off when no link is
detected. It displays solid amber (10/100 Mbps) for a valid link; displays blinking amber when transmit-
ting or receiving packets in a link up state.
10000 XFP1 LEDs
This LED corresponds to XFP connector 25 on OS6850-P24X switches and port 49 on OS6850-P48X
switches. It displays solid green when the port is up and blinking green when the port is transmitting or
receiving packets in a link up state. This LED is off when no link is detected.
10000 XFP2 LEDs
This LED corresponds to XFP connector 26 on OS6850-P24X switches and port 50 on OS6850-P48X
switches. It displays solid green when the port is up and blinking green when the port is transmitting or
receiving packets in a link up state. This LED is off when no link is detected.