Regulatory Compliance and Safety Information Standards Compliance
OmniSwitch 6855 Series Hardware Users Guide March 2009 page A-7
JATE
This equipment meets the requirements of the Japan Approvals Institute of Telecommunications Equip-
ment (JATE).
CISPR22 Class A warning
This is a Class A product. In a domestic environment, this product may cause radio interference. Under
such circumstances, the user may be requested to take appropriate countermeasures.
VCCI
This is a Class A product based on the standard of the Voluntary Control Council for Interference by
Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio
disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.
Class A Warning for Taiwan and Other Chinese Markets
This is a Class A Information Product. When used in a residential environment, it may cause radio
frequency interference. Under such circumstances, the user may be requested to take appropriate counter-
measure.
NEBS
• GR-63-CORE (Temp, humidity, altitude, contamination)
• GR-1089-CORE, Issue 4 (Sections 2-3)
• GR-1089-CORE, Issue 4 (Sections 3.2, 4-10)
The following notes and warnings apply to all NEBS compliant platforms:
Grounding requirements: To ground the equipment properly, connect a Panduit Corporation UL listed
Lug, P/N: LCD8-10AL to the two threaded holes located on the rear of each chassis and power supply
module. All connections should be made using 8AWG copper conductors.
To Next Page
Loading...
