Alcatel-Lucent OmniSwitch 6860 - Page 36

OmniSwitch OS6860/OS6900/OS10K Troubleshooting Guide Part No.032996-00 Rev.A
AOS Release 7.X and 8.X January 2015
Alcatel-Lucent Page 36 of 148
=3,DEST_TYPE=0,DESTINATION_1=0x51ce,DESTINATION=0x1d,DATA=0x82000001d,CPU=0,CLASS_ID=0,ASSOCIATED
_DATA=0x82000001d>
To recover the customer network from the issue state, change the static_bit value back to zero.
BCM.0> mod l2_entry 5408 1 static_bit=0
BCM.0> search l2_entry mac_addr=0xe8e7322d2c47
Searching L2_ENTRY table indexes 0x0 through 0x1ffff...
L2_ENTRY.ipipe0[5408]:
<VPG_TYPE_1=1,VPG_TYPE=0,VPG_1=0x1ce,VPG=0x1d,VLAN_ID=1,VIF:L2MC_PTR=0x1d,VFI=1,VALID=1,T_1=1,TRI
LL_NETWORK_RECEIVERS_PRESENT=0,TGID_1=0x1ce,TGID=0x1d,T=0,STATIC_BIT=0,SRC_DISCARD=0,SCP=0,RPE=0,
RESERVED_1=0x322d2,REMOTE_TRUNK_1=1,REMOTE_TRUNK=0,PRI=0,PORT_NUM_1=0x4e,PORT_NUM=0x1d,PENDING=0,
OVID=1,MODULE_ID_1=0xa3,MODULE_ID=0,MAC_BLOCK_INDEX=0,MAC_ADDR=0xe8e7322d2c47,LOCAL_SA=1,L2MC_PTR
=0x1d,L2:VPG_TYPE=0,L2:VPG=0x1d,L2:VLAN_ID=1,L2:VFI=1,L2:TRILL_NETWORK_RECEIVERS_PRESENT=0,L2:TGI
D=0x1d,L2:T=0,L2:STATIC_BIT=0,L2:SRC_DISCARD=0,L2:SCP=0,L2:RPE=0,L2:REMOTE_TRUNK=0,L2:PRI=0,L2:PO
RT_NUM=0x1d,L2:PENDING=0,L2:MODULE_ID=0,L2:MAC_BLOCK_INDEX=0,L2:MAC_ADDR=0xe8e7322d2c47,L2:L2MC_P
TR=0x1d,L2:KEY=0x7473991696238008,L2:DUMMY_INDEX=0,L2:DST_DISCARD=0,L2:DEST_TYPE=0,L2:DESTINATION
=0x1d,L2:DATA=0x1d,L2:CPU=0,L2:CLASS_ID=0,L2:ASSOCIATED_DATA=0x1d,KEY_TYPE=0,KEY=0x74739916962380
08,IVID=0xc47,HITSA=1,HITDA=0,EVEN_PARITY=0,DUMMY_INDEX=0,DST_DISCARD=0,DEST_TYPE_1=3,DEST_TYPE=0
,DESTINATION_1=0x51ce,DESTINATION=0x1d,DATA=0x1d,CPU=0,CLASS_ID=0,ASSOCIATED_DATA=0x1d>
BCM.0>