Alcatel-Lucent OmniSwitch AOS Release 6 - Page 131

Using SNMP SNMP Overview
OmniSwitch AOS Release 6 Switch Management Guide July 2010 page 3-45
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2),
highWarning(3), lowWarning(4), lowAlarm(5).
ddmTxBiasCurrent—The current Transmit Bias Current of the SFP/XFP in 10s of milli-Amperes (mA).
145 ddmTxPowerThresholdViolated ifIndex
ddmNotifica-
tionType
ddmTxOutput-
Power
port This trap is sent when an SFP/
XFP/SFP+ Tx output power has
crossed any threshold or reverted
from previous threshold violation
for a port represented by ifIndex.
It also provides the current real-
time value of SFP/XFP/SFP+ Tx
output power.
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2),
highWarning(3), lowWarning(4), lowAlarm(5).
ddmTxOutputPower—The current Output Power of the SFP/XFP in 10s of milli-Watts (mW).
146 ddmRxPowerThresholdViolated ifIndex,
ddmNotifica-
tionType
ddmRxOpti-
calPower
port This trap is sent when an SFP/
XFP/SFP+ Rx optical power has
crossed any threshold or reverted
from previous threshold violation
for a port represented by ifIndex.
It also provides the current real-
time value of SFP/XFP/SFP+ Rx
optical power
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2),
highWarning(3), lowWarning(4), lowAlarm(5).
ddmRxOpticalPower—The current Received Optical Power of the SFP/XFP in 10s of milli-Watts (mW).
147 pimBsrElectedBSRLostElection pimBsrElected
BSRAddress
Type,
pimBsrElected
BSRAddress,
pimBsrElected
BSRPriority
pim This trap is sent when the current
E-BSR loses an election to a new
Candidate-BSR.
pimBsrElectedBSRAddressType—The address type of the elected BSR.
pimBsrElectedBSRAddress—The unicast address of the elected BSR.
pimBsrElectedBSRPriority—The priority value for the elected BSR for this address type. Higher values for
this object indicate higher priorities (0 - 255).
148 pimBsrCandidateBSRWinElection pimBsrCandi-
dateBSR
ElectedBSR
pim This trap is sent when a C-BSR
wins a BSR Election.
pimBsrCandidateBSR ElectedBSR—Indicates whether the local router is the elected BSR for this zone.
149 esmViolationRecoveryTimeout ifIndex,
esmViolation-
Recovery
Notification-
Type
port This trap is sent when a user port
is re-enabled after an esm viola-
tion recovery timeout.
ifIndex—The interface index.
esmViolationRecoveryNotificationType—The trap type for monitored violation-recovery parameters.
No. Trap Name Objects Family Description