Multiple User Sessions Using the CLI
page 6-22 OmniSwitch AOS Release 6 Switch Management Guide July 2010
Possible values for command domains and families are listed here:
Terminating Another Session
If you are logged in with administrative privileges, you can terminate the session of another user by using
the kill command. The following command will terminate login session number 4.
-> kill 4
The command syntax requires you to specify the number of the session you want to kill. You can use the
who command for a list of all current user sessions and their numbers. The kill command takes effect
immediately.
domain families
domain-admin file telnet debug
domain-system system aip snmp rmon webmgt config
domain-physical chassis module interface pmm health
domain-network ip rip ospf bgp vrrp ip-routing ipx ipmr ipms rdp
ospf3 ipv6
domain-layer2 vlan bridge stp 802.1q linkagg ip-helper
domain-service dns
domain-policy qos policy slb
domain-security session avlan aaa
domain-mpls
To Next Page
Loading...
