OmniSwitch AOS Release 6 Switch Management Guide July 2010 Index-1
Index
Symbols
!! command 6-10
A
aaa authentication command 11-7, 11-8, 11-10, 12-5
aaa radius-server command 11-7
accounting
for Authenticated Switch Access 11-12
ACE/Servers 11-4
application examples
applying configuration files 7-4
Authenticated Switch Access 11-7
CLI 6-7, 6-23
CMM 5-6
configuration file 7-2
customer login user accounts 10-7
Emergency Restore 5-31
file management 1-30
logging into the switch 2-4
network administrator user accounts 10-6
NTP 4-3, 4-4
Prefix Recognition 6-12
SNMP 3-4
Trap Filters 3-5
WebView 12-5
applying configuration files
application examples 7-4
ASA
see Authenticated Switch Access
ASA Configuration
verify information about 11-13
Authenticated Switch Access 11-4
accounting 11-12
application examples 11-7
management interfaces 11-9
authentication
MD5 3-48
SHA 3-48
traps 3-51
Automatic Remote Configuration 8-4
Bootup Configuration File 8-10
Debug Configuration File 8-10
Firmware upgrade Files 8-10
Instruction File 8-10
Script File 8-10
Troubleshooting 8-15
Automatic Remote Configuration network components 8-5
TFTP File Server 8-5
B
banner
login 2-19
pre-login text 2-20
boot.cfg file 5-4, 5-16
Emergency Restore 5-35
C
cd command 1-9
certified directory 5-4
copying to working directory 5-22, 5-27
Chassis Management Module
see CMM
chmod command 1-16
CLI 6-1
application examples 6-7, 6-23
domains and families 10-17
logging commands 6-15–6-16
specifications 6-2
CLI usage
verify information about 6-24
CMM 5-1
application examples 5-6
boot.cfg file 5-4
cancelling a reboot 5-15, 5-20, 5-25
certified directory 5-4
checking reboot status 5-15
configuration files 5-4
copying
certified directory to working
directory 5-22, 5-27
running configuration to working
directory 5-16
working directory to certified
directory 5-21, 5-26
displaying current configuration 5-23, 5-30
displaying switch files 5-24
image files 5-4
managing 5-14
rebooting 5-14, 5-25
rebooting from the working directory 5-18, 5-26
running configuration 5-4, 5-5
scheduling a reboot 5-15, 5-25
specifications 5-3
swapping primary for secondary 5-29
synchronizing primary and secondary 5-26, 5-27
working directory 5-4
CMM Conditions
verify information about 5-36
CMM scenarios 5-6
lost running configuration 5-6
rollback to previous software 5-9
running configuration saved to working directory 5-7
working directory saved to certified directory 5-8
Command Line Interface
see CLI
To Next Page
Loading...
