Alcatel-Lucent OmniSwitch AOS Release 6 - Logging into the Switch; Login Specifications; Login Defaults

Login Specifications Logging Into the Switch
page 2-2 OmniSwitch AOS Release 6 Switch Management Guide July 2010
Login Specifications
Login Defaults
Access to managing the switch is always available for the admin user through the console port, even if
management access to the console port is disabled.
The following table describes the maximum number of sessions allowed on an OmniSwitch:
Platforms Supported OmniSwitch 6400, 6850, 6855, 9000, 9000E
Telnet clients supported Any standard Telnet client
FTP clients supported Any standard FTP client
HTTP (WebView) clients supported
– Internet Explorer for Windows NT, Windows
XP, and Windows 2000, version 6.0
– Netscape for Windows NT, Windows XP, and
Windows 2000, version 7.1
– Netscape for Sun OS 2.8, version 4.79
– Netscape for HP-UX 11.0, version 4.79
Secure Shell clients supported Any standard Secure Shell client
Secure Shell DSA public key authentication Password
DSA Public Key
SNMP clients supported Any standard SNMP manager (such as HP Open-
View)
Parameter Description Command Default
Session login attempts allowed
before the TCP connection is
closed.
session login-attempt 3 attempts
Time-out period allowed for
session login before the TCP
connection is closed.
session login-timeout 55 seconds
Inactivity time-out period. The
length of time the switch can
remain idle during a login
session before the switch will
close the session.
session timeout 4 minutes