Alcatel-Lucent OmniSwitch AOS Release 7 - Clearing UDLD Statistics; Verifying the UDLD Configuration

Verifying the UDLD Configuration Configuring UDLD
page 2-8 OmniSwitch AOS Release 7 Network Configuration Guide March 2011
Clearing UDLD Statistics
To clear the UDLD statistics, use the clear udld statistics port command. For example, to clear the
statistics for port 4 on slot 1, enter:
-> clear udld statistics port 1/4
To clear the UDLD statistics on all the ports, enter:
-> clear udld statistics
Verifying the UDLD Configuration
To display UDLD configuration and statistics information, use the show commands listed below:
For more information about the resulting display from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show udld configuration port and show udld statistics
port commands is also given in “Quick Steps for Configuring UDLD” on page 2-3.
show udld configuration Displays the global status of UDLD configuration.
show udld configuration port Displays the configuration information for all UDLD ports or for
a particular UDLD port on the switch.
show udld statistics port Displays the UDLD statistics for a specific port.
show udld neighbor port Displays the UDLD neighbor ports.
show udld status port Displays the UDLD status for all ports or for a specific port.