Displaying Server Load Balancing Status and Statistics Configuring Server Load Balancing
page 19-24 OmniSwitch AOS Release 7 Network Configuration Guide March 2011
To view detailed information on a single probe enter show ip slb probes followed by the probe name as
shown in the example below:
-> show ip slb probes phttp
Probe phttp
Type = HTTP,
Period (seconds) = 60,
Timeout (milliseconds) = 3000,
Retries = 3,
Port = 0,
Username = ,
Password = ,
Expect = ,
Status = 200,
URL = /,
Note. See the “Server Load Balancing Commands” chapter in the OmniSwitch CLI Reference Guide for
complete syntax information on SLB show commands.
To Next Page
Loading...
