OmniSwitch AOS Release 7 Network Configuration Guide March 2011 page 21-47
Verifying Policy Configuration
To view information about policy rules, conditions, and actions configured on the switch, use the follow-
ing commands:
show policy condition Displays information about all pending and applied policy conditions or
a particular policy condition configured on the switch. Use the applied
keyword to display information about applied conditions only.
show policy action Displays information about all pending and applied policy actions or a
particular policy action configured on the switch. Use the applied key-
word to display information about applied actions only.
show policy rule Displays information about all pending and applied policy rules or a par-
ticular policy rule. Use the applied keyword to display information
about applied rules only.
show active policy rule Displays applied policy rules that are active (enabled) on the switch.
To Next Page
Loading...
