OmniSwitch AOS Release 7 Network Configuration Guide March 2011 page 21-55
Verifying Condition Group Configuration
To display information about condition groups, use the following show commands:
See the OmniSwitch CLI Reference Guide for more information about the syntax and output for these
commands.
show policy network group Displays information about all pending and applied policy network
groups or a particular network group. Use the applied keyword to dis-
play information about applied groups only.
show policy service Displays information about all pending and applied policy services or a
particular policy service configured on the switch. Use the applied key-
word to display information about applied services only.
show policy service group Displays information about all pending and applied policy service
groups or a particular service group. Use the applied keyword to display
information about applied groups only.
show policy mac group Displays information about all pending and applied MAC groups or a
particular policy MAC group configured on the switch. Use the applied
keyword to display information about applied groups only.
show policy port group Displays information about all pending and applied policy port groups
or a particular port group. Use the applied keyword to display informa-
tion about applied groups only.
To Next Page
Loading...
