Alcatel-Lucent OmniSwitch AOS Release 7 - Verifying the Authentication Server Configuration

OmniSwitch AOS Release 7 Network Configuration Guide March 2011 page 2327
Removing an LDAP Authentication Server
To delete an LDAP server from the switch configuration, use the no form of the command with the rele-
vant server name.
-> no aaa ldap-server topanga5
The topanga5 server is removed from the configuration.
Verifying the Authentication Server Configuration
To display information about authentication servers, use the following command:
An example of the output for this command is given in “Quick Steps For Configuring Authentication
Servers” on page 23-4. For more information about the output of this command, see the OmniSwitch CLI
Reference Guide.
show aaa server Displays information about a particular AAA server or AAA servers.