Diagnosing Switch Problems Monitoring Switch Health
OmniSwitch AOS Release 7 Network Configuration Guide March 2011 page 26-41
The following sections include a discussion of CLI commands that can be used to configure resource
parameters and monitor or reset statistics for switch resources. These commands include:
• health threshold—Configures threshold limits for input traffic (RX), output/input traffic (TX/RX),
memory usage, CPU usage, and chassis temperature. See page 26-43 for more information.
• show health configuration—Displays current health threshold settings. See page 26-44 for details.
• health interval—Configures sampling interval between health statistics checks. See page 26-45 for
more information..
• show health —Displays health statistics for the switch, as percentages of total resource capacity. See
page 26-46 for more information.
To Next Page
Loading...
