i
Contents
Chapter 1: Switch Management 1-1
Configuration Options 1-1
Required Connections 1-1
Console Port (Out-of-Band) Connections 1-1
In-Band Connections 1-2
Chapter 2: Console Interface 2-1
Log-in Screen 2-1
Main Menu 2-2
System and Switch Information 2-5
Displaying System Information 2-6
Displaying Switch Version 2-7
Management Setup Menu 2-8
Changing the Network Configuration 2-9
IP Configuration 2-10
IP Connectivity Test (Ping) 2-11
HTTP Configuration 2-12
Configuring the Serial Port 2-13
Assigning SNMP Parameters 2-14
Configuring Community Names 2-15
Configuring IP Trap Managers 2-16
Console Login Configuration 2-17
Downloading System Software 2-18
Using TFTP Protocol to Download Over the Network 2-18
Saving the System Configuration 2-19
Managing the Switch 2-20
Configuring the Banner Message 2-21
Configuring the Switch 2-22
Configuring Port Parameters 2-24
Viewing the Current Port Configuration 2-25
Using the Spanning Tree Algorithm 2-26
Configuring Bridge STA 2-27
Configuring STA for Ports 2-28
Viewing the Current Spanning Tree Information 2-30
Displaying the Spanning Tree Bridge State 2-31
Displaying the Spanning Tree Port State 2-32
Using a Mirror Port for Analysis 2-33
Configuring Port Trunks 2-34
IGMP Multicast Filtering 2-36
Configuring IGMP 2-37
To Next Page
Loading...
