Need help?Do you have a question about the Alcatel OS6400-48 and is the answer not in the manual?
General| Operating Temperature | 0 °C to 45 °C |
|---|---|
| Ports | 48 |
| Uplink Ports | 4 |
| Routing Protocol | RIP |
| Management | SNMP |
| Dimensions (W x D x H) | 44 cm x 25.4 cm x 4.4 cm |
| Form Factor | Rack-mountable - 1U |
Lists the OmniSwitch 6400 Series products that this guide applies to.
Lists OmniSwitch products not covered by the information in this guide.
Defines the target audience and provides guidance on when to read the manual.
Outlines the hardware-related information covered and the guide's structure.
Provides a roadmap of the documentation suite and lists related guides.
Details where to find the latest documentation and how to obtain technical support.
Describes the various OmniSwitch 6400 Series chassis models available.
Discusses features that enhance system availability and resilience.
Details the configurations of various OmniSwitch 6400 Series chassis models.
Covers front panel, rear panel, and specifications for the OS6400-24.
Covers front panel, rear panel, and specifications for the OS6400-P24.
Covers front panel, rear panel, and specifications for the OS6400-U24.
Covers rear panel and specifications for the OS6400-48.
Covers front panel, rear panel, and specifications for the OS6400-P48.
Explains the meaning of various LED indicators on the chassis.
Lists and describes power supply models, their specs, shelf, and cords.
Console port details, default settings, and connector pinouts.
Advice on clearances, airflow, and environmental considerations for mounting.
Covers airflow, fan speed, temperatures, loading, and earthing.
Overview of installation and available mounting methods.
Step-by-step guides for tabletop and rack mounting.
Instructions for setting up and cabling stacked switches.
Procedures for installing and hot-swapping power supplies.
Procedures for powering on switches in stand-alone and stacked modes.
Explains the behavior of LEDs during the switch boot process.
How to monitor chassis health and status using CLI commands.
Lists general Power over Ethernet specifications.
How to check the status of PoE power supplies.
Details on setting power limits, priority, and detection methods.
Explains and illustrates the priority disconnect behavior.
Using CLI commands to monitor PoE statistics.
Introduces stacking, switch roles within a stack, and failover mechanisms.
Methods for choosing primary and secondary management modules.
Explains the idle module role, pass-through state, and recovery procedures.
Covers dynamic and manual slot number configuration.
Procedures for module management and stack operations.
Guidelines to prevent stack splitting and manual role changes.
Synchronization process and stack monitoring methods.
Covers CE Mark, general standards, and China RoHS hazardous substance information.
Provides FCC, Canada, JATE, and CISPR22 compliance information.
Safety warnings in multiple languages and specific precautions.
To Next Page
