Stacking Cables OmniSwitch 6855 Series Chassis and Hardware Components
page 2-42 OmniSwitch 6855 Series Hardware Users Guide September 2011
Stacking Cables
The following cables and transceivers can used for stacking switches into a virtual chassis. Depending on
the length and stacking requirements, either copper or fiber can be used.
Note. See Chapter 7, “Managing OmniSwitch 6855 Series Stacks,” for information on managing
OmniSwitch 6855 Series switches in a stacked configuration.
For additional transceiver specifications refer to the OmniSwitch Transceivers Guide.
SFP+ Copper Cable - Direct Attached
SFP+ Transceiver
10 Gigabit SFP+ Copper Cables - Direct Attached Lengths
ISFP-10G-C10M
ISFP-10G-C30CM
ISFP-10G-C3M
10 Meters
30 Centimeters
3 Meters
10 Gigabit Fiber SFP+ Transceivers Lengths
ISFP-10G-LR
ISFP-10G-SR
10 Kilometer
300 Meters
To Next Page
Loading...
